Mel Meter 8704R • ELF Range down to 30Hz • Night Vision friendly, high intensity red flashlight & red backlight • Custom Dual Display correlates EMF & temperature cold spots simultaneously • Custom Glow-In-The-Dark push buttons, a 30 sec. charge from your flashlight lasts up to 3 hours • Custom Glow-In-The-Dark Lightning Bolt EMF stickers help identify EMF "Hot Spots" for debunking during baseline analysis. • EMF "Burst Mode" feature is ideal for sweeping a room & tracking dynamic EMF movement • Measurement Ranges: 20, 200, 2000 - uTesla and 200, 2000, 20,000 - mGauss • Super bright custom red "Night view" display with On/Off button • Fast response Type "K" Thermocouple Temperature Sensor • Record feature captures Min & Max values The Mel Meter Model 8704R is an intelligent microprocessor based instrument specifically designed for paranormal investigators & enthusiasts. Several important features have been incorporated into this durable, precision hand held instrument. All of them accessible with the meter being held in on hand. Measures EMF & Temperature "Cold Spots" Simultaneously During investigations investigators will often encounter an EMF change which is usually followed by a significant temperature drop. With the Mel Meter 8704R investigators are now able to validate both changes simultaneously while tracking the source in real time with one hand in total darkness. Measures ELF Down to 30Hz It has been the generally accepted theory that spirits do emit an extremely low frequency (ELF) EM field, which commonly registers between 2.0 and 7.0 mGauss in strength. Typically, anything below 40Hz would be considered part of the ELF range. The Mel-8704 was designed to address this ELF range, and is actually 20Hz lower than a KII's 50Hz bandwidth. Custom Red "Night View" Display The Backlight display measures a full 2" x 1" with a 0.60" EMF display and 0.25" ambient temperature on the same screen. Both measurements can be read from 10' to 15' away. The display can be turned ON or OFF manually for display viewing in dark areas, as wells as being bright enough so that it can be used in total darkness to navigate stairwells, corridors, and door ways. Illumination of objects up to 8' away is possible with this special display once your eyes become adjusted to the light. Red Navigator Flashlight (Night Vision friendly) This feature utilizes a high intensity long life (100,000 hours) collimated red LED to provide instant illumination of the floor in front of you, and of objects up to 30' away. Ideal for fast paced tracking of EMF and Cold Spot changes in total darkness while using the backlight display, this 670nm wavelength will not interfere with Nigh Vision equipment. Even after 5 hours of 100% continuous uninterrupted usage, The digital current regulation circuitry provides plenty of energy to power the Mel Meter and backlight Display for many more hours. EMF "Burst Mode" This feature allocates 100% of the micro-processors scan speed to monitor dynamic EMF changes. The display can update so quickly that your eyes will barley be able to keep up with it. If something is on the move, this feature can be activated with the push of a button. An investigator could use the "Record" function in this mode to capture Min & Max measured values. Mel-Cal The Mel Meter is the only intelligent EMF / temperature device that uses a proprietary "Smart Calibration" function that allows the user to calibrate the instrument in the field. Should the unlikely event ever occur, and the unit performs out of spec all you need to do is contact the manufacturer and give them the serial number ID. They will provide a special code sequence to get the unit working in "Like New" condition again.

Paranormal & Occult Research Team © 2008-2012 All Rights Reserved.